# Firmware-related tools

## fritzrepeater-1200.tar.gz

Tools for flashing a Fritz! Repeater 1200. See our wiki for more info:
https://wiki.freifunk-stuttgart.net/anleitungen:fritz_repeater_1200

## activate-cfg-mode

Tool to activate the config mode over network. Needed for devices which don't have a reset button such as the Zyxel NWA55AXE.

This has been compiled statically for Linux x86-64.

If you want to build this yourself, find the sources here: 
https://gitlab.freifunk-stuttgart.de/firmware/gluon-community-packages/-/tree/master/ffda-network-setup-mode/src

The tool at hand has been built from the sources in activate-cfg-mode.tar.gz.

## openwrt-23_tuf-ax4200-initramfs.trx

This image can be flashed from Stock Firmware on the ASUS TUF AX4200.

After this image was flashed, immediately flash Gluon without powering off the device in between.

It is a mirror of what was found in the OpenWRT Forum:
https://forum.openwrt.org/t/asus-tuf-ax4200-support/155738/241

## cudy-intermediary-openwrt

Some Cudy devices need to be flashed with a OpenWRT image provided by the manufacturer (called intermediate image) before they accept OpenWRT or Gluon images.

This folder contains a mirror of these intermediate images for several Cudy devices (WR1300, WR2100, WR3000).

This is a mirror of what was found on a Google drive linked on the manufacturer website:
https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj